ROOFERX · ONE ENGINE

The Engine

Load a roof file or measure it by hand. Same engine either way. Everything runs on this device. No account, no signal, nothing uploaded.

PUT YOUR NAME ON IT — IT FLOWS EVERYWHERE

DROP A ROOF FILE

Drop a roof XML here
or tap to pick one · it never leaves this device

NO ROOF FILE? RUN A TEST ROOF

Built into the engine, so it works on a phone with no file. Each one has a known right answer. If the engine ever says something else, it is wrong, and that is worth telling Thomas.

WHAT HAPPENS TO THE FILE: it is read in your browser and thrown away when you close the page. It is not uploaded, not stored, not sent anywhere, and no copy is kept.

ONE ROW PER ROOF PLANE

0.0 SQUARES, WITH 12.5% WASTE
0FLAT FOOTPRINT SQ FT
0TRUE ROOF SQ FT
0.0SQUARES, NO WASTE
0BUNDLES AT 3/SQ

Flat footprint × the true slope factor for its pitch: √(rise² + 12²) ÷ 12. Real trig, computed here, not a lookup table. Triangle planes (hip ends) count half: ½ × base × depth. Waste is picked on THE SHEET tab. Enter jumps to the next box.

Your planes are kept on this device only, so a closed tab doesn’t lose the roof.

WASTE — YOU PICK IT, NOT THE TOOL

This engine will not choose a waste factor. It has never seen this roof. Whatever you pick, the sheet records that you picked it.

WHAT YOU SHOW THEM

There is no price on this sheet and there never will be. A number in front of a homeowner before anybody has been in the attic is how people get hurt.

THE PART THAT SELLS IT

Hand them the phone and let them read this. Every other tool is built to produce a number. This one is built to show its gaps.

FIELD VERIFY
What is under the shingles

Decking condition, rot, delamination, spacing. Nobody knows this from the driveway. It is found when the tear-off starts, and it changes the job.

FIELD VERIFY
How many layers are on there

One layer or three changes tear-off, dump fees, and how a permit reads. Counted at the edge with a bar, not guessed from a photo.

FIELD VERIFY
Whether the venting is adequate

Intake and exhaust measured against attic square footage and what is actually open — not what is installed.

FIELD VERIFY
Flashing, chimney and wall terminations

Step flashing hiding behind siding is not visible from anywhere but the roof.

FIELD VERIFY
Leak barrier, penetrations, fasteners

Climate, code, eave geometry and penetration count. Never zero by omission.

UNAVAILABLE
A price

This engine does not price work. It does not know your labor, your supplier, your dump rates or this week’s material cost, and it will not pretend to.

UNAVAILABLE
Whether you need a full roof

A judgment made by a roofer standing on the roof. A measuring tool that also recommends buying the biggest version of itself is not a measuring tool.

MAKE A POSTER

Hit COPY, open Facebook, tap where you write a post, hold down and pick Paste. The picture drops straight in. If Copy is blocked, hit SAVE and it goes to your photos.

← RooferX.Club